Time:2013.05.22 News source :Danyang Shiji Meijing making Co.Ltd. Browsing number:

You can try using a conical cutting depth to be processed. For example, if you carry out cutting depth of 2mm 2 roughing passes,
1 pass: initially 3mm, conical final cutting depth of 1mm.
2 passes: initially 1mm, finally 3mm. (In this case, 2 passes only the tip of lateral movement, natural depth of cut for tapered)
Thus, by changing the depth of cut to cut, can position the tip of the load force changes in order, can control the state of wear and longer tool life.

This paper is divided into 1 pages